Waterfall Leak – Part 2 – The Repair

In order to repair our broken waterfall seal, we had some more disassembling to do. We took off a few layers of rocks directly below the spillway. This gave us access to the screws, or I should say what was left of them, that held the pond liner in place. The liner was sandwiched between the waterfall container and the molded, heavy black plastic spillway piece. Most of the screws, as well as about half of the metal sleeves that they screwed into, had corroded over the years. Once we managed to free all of the pieces, we were able to tell that the root came from the tree at the base of the berm and not the rosemary at the top of the berm as I had initially surmised.

We clipped the root and had to remove the bags of lava rock from the waterfall container to get it all out. This prompted some needed maintenance, as much sludge had accumulated in the container over the years. We hosed off the three mesh bags full of lava rocks and the three large fiber filters at the bottom of the container. That wasn’t the end of the sludge however. Luckily we have a wonderful Oase pond vacuum that we used to remove the rest of it along with hundreds of empty pond snail shells.

In order to remove as much tree root as possible, so that this problem didn’t come right back, we moved the three large boulders to the right of the waterfall and the small rocks that rested on them. I dug back as far as I dared in the clay of the berm and clipped the offending root. Now we were finished disassembling and could begin the process of reassembling. I started by compacting the clay back into the hole in the berm that I had created when removing the tree root.

Other than the lava rock bags being heavy, putting the filter system back together in the waterfall was easy. Next we had to figure out how to put everything back together at the spillway to create a good watertight seal. My husband found stainless steel bolts that would screw into the remaining sleeves or fasten with a nut in the holes where the sleeves had disintegrated. Just the compression provided by these screws would not have been enough however. After one false start to create a watertight seal we got the help we needed from Whiz Q Stone, a local stone yard and pond and landscape supply.

From Whiz Q Stone, I bought the seam tape, seam cover tape and primer from Aquascape Designs that I needed to create a watertight seal between the plastic waterfall pieces and the heavy EPDM pond liner. The primer causes the surfaces that you put it on to meld into each other to create a watertight seal. It worked like a charm. If you take on a project like this, make sure you read the label and take appropriate precautions when using these products.

Next, the rocks had to be put back. They never go back exactly like they were before. Part of this is because heavy puzzle pieces are difficult to manipulate and also because there is more than one solution to the puzzle. I filled large voids with black waterfall foam that is available even at your local hardware store.

Almost done now, I just needed to add some water and water conditioner before turning on the pump. Everything worked perfectly and better yet, after several hours there were no wet spots in the garden or bubbles under the liner.

Garden Pond and Waterfall Leak

One day my husband came in and asked if we had had much rain earlier that day. It turns out that when he pulled a couple of weeds near our garden pond and waterfall, he found the ground to be rather wet. We had not had any appreciable rain and as we investigated further, it turned out that there was some standing water in another area of the garden and “bubbles” under the pond liner in the stream section. I had seen these bubbles before, only much worse, shortly after we had had the pond installed. At that time they were caused by an uneven settling of the waterfall filter container that allowed water to pour over a back corner and get under the liner.

We decided to turn the pump (waterfall) off overnight. In the morning there was no standing water and no bubbles. We turned the pump back on in the morning and within a few hours the bubbles and standing water were back. Now we knew that when the waterfall was off, there was no leak. The hunt was on for the source.

Water was flowing properly from the waterfall container and not over a back corner as it had previously. As we traced the wet soil, it continued up the berm towards the waterfall. Finally it looked like the only way to trace the source further was to turn off the pump again and disassemble the waterfall. When we lifted off the fake spillway rock, we found the culprit. A root of a nearby tree had worked its way between the pond liner and the waterfall filter container, breaking the seal and allowing water to seep under the liner.

Now all we had to do was fix the broken seal and we should be back in business. This was easier said than done however. I’ll explain the process in my next installment.

Photo Art Bookmarks

I’m sure you have torn off pieces of paper to mark your place in a book or magazine. I have. I have also had them fall out and litter the ground thereby losing my place. If this has happened to you, you need something better suited to the task. I have a more permanent solution for you, photo art bookmarks.

I am excited about my new offering. These bookmarks are thin enough to be kind to your book while saving your place, yet substantial enough to make it easy to turn to your marked page. Not only are they functional, but they are small pieces of art. I have adapted some of my altered photo wall art offerings and note card designs as well as creating photo art designs just for the bookmarks. The back of each bookmark includes a short saying.

Bring a little art into your life or give these mini art bookmarks as gifts. They come in two sizes. It is only September, however many people are already thinking about Christmas and these bookmarks would make great stocking stuffers.

Summer Jewels for the Garden

A challenge that faces low water usage gardeners during the dog days of summer, where rainfall is sporadic, is how to add color to your garden when your plants want to go dormant throughout these hot, dry days. One solution I have found are rain lilies of the genus Zephyranthes.

These hardy bulbs send up flowers when the weather is hot and a passing summer shower temporarily brings welcome relief from a dry spell. Their flowers range from a larger pink variety to crocus like blooms of peach, yellow and white, with the white ones being the smallest. The pink ones are usually the first to send up buds, followed soon by the others to create a riot of cheery color. This delightful burst of color lasts from a couple of days to a week depending on the weather conditions.

Rain lilies will develop into larger clumps as the bulbs naturally divide. If you let the seed heads mature, they will also propagate from seed. An interesting note, when the pink rain lilies reseed, they produce the smaller bright yellow rain lily. All of the others seem to come up true from seed. Therefore if you want to share your pink rain lilies, you must divide the bulbs.

When rain lilies are not in bloom, their strap like leaves provide a spot of green. If you have a particularly long dry spell, these grassy clumps may almost disappear. The foliage will also disappear with a frost and then reappear as the weather warms in the spring.

Plant Zephyranthes and you will be treated to treasure chests of colorful jewels gracing your garden shortly after you are lucky enough to catch a summer shower.

CraftGawker = Eye Candy

I enjoy going to museums and galleries to look at well designed and executed “art”. I use this term to include everything from furniture to paintings to jewelry and home décor, to name a few categories. This week I came across a reference for an online photo gallery of great objects. No need to drive, find a parking place or buy a ticket. You will find awesome photos of wonderful items in a variety of categories. If you also enjoy window shopping, you’ll enjoy this site.

In addition to being a really fun site to poke around on and look at all the pretty things, you can also submit your own photos of neat things. I have had two of my item photos accepted so far.

CraftGawker is a spin-off from the FoodGawker gallery. If well cooked and well presented food is more your thing, then find a feast for your eyes at this website. Happy browsing.

Design This - Mother - Daughter Jewelry

There is a place on Etsy where you can request a custom item from any talented Etsian that responds to your request. It is called alchemy. As I scanned the alchemy requests one day, I came across an interesting one for “Mother – Daughter Jewelry”. The requester wanted something that both she and her mother could wear to remind each other that they were there for one another in spirit, even when they couldn’t be in person. I had recently made a necklace and earring set that I thought might interest this person.

She saw potential and sent me a convo (Etsy e-mail) to see if I could make the vision that my jewelry set had sparked in her mind as the perfect manifestation of her request. Her explanation of what she wanted can be found in a blog post by PreciousMetals4U. (This shop promptly supplied the custom charms that my customer wanted to have included in the bracelet design.)

I set out to locate crystals in the colors of the birthstones of the five women from her family that were to be represented, as well as the sterling silver chain and findings that were a requested upgrade to my original bid. My customer coordinated having the charms shipped straight to me, as we were on a tight schedule due to her upcoming move to attend graduate school.

When I finally had all of my materials, (Some arrived a day later than I had anticipated!) I gathered them all in one place and began assembling the crystal sections. When those were all finished, I clipped the sterling chain into sections of the needed lengths. The challenge here was to make two different lengths of bracelets look as close to identical as possible. I laid out all of the components for one bracelet at a time on my beading board and then assembled each bracelet.

With the bracelets completed, it was time to take some photographs to send to my customer for approval. She was pleased, so each bracelet was placed in its own gift box and then they were prepared to be sent by priority mail. I’m happy to say that they arrived in the knick of time and the gifts were well received.

Recycled Wood Products

Storms, disease, drought, they all take their toll on our trees. Often when a tree or a portion thereof needs to be removed, it winds up in our landfills. Some communities and tree services have realized that this is a huge waste of resources and have begun chipping this material and composting it for mulch. Unfortunately, many times the chips wind up in landfills too. Much of this wood could be turned into useful items if it could find its way to the right person.

I had a sycamore tree die from a recent drought. It was nice wood, so I’m having the main trunk planked to panel a wall. I had my tree service leave the smaller pieces as well because it seemed a shame to not do something with all of that pretty wood. I have begun to make some home décor items from this sycamore wood.

The first item I made was a wall clock. I cut a ¾ inch slab from a limb and sanded it. I then applied several coats of a clear stain and sealer to bring out the beauty of the wood. Now to add the guts of the clock. Some battery powered clockworks can be a little on the noisy side, however I used a brand that is very quiet. I have used this brand in the past to replace distracting ones. To the clockworks I added decorative hands and numbers for the clock face.

My next projects were a set of tealight candle holders, business card holders and pen blanks for wood turners. For the candle holders, I drilled a hole in one end of a length of limb of the proper diameter for a tealight to fit into. I sanded and finished each of the three candle holders of the set as I had the clock. Next, came the business card holders. Earlier this year I attended a conference and needed something to place my business cards in. Again my sycamore wood was used to created pretty, useful items instead of rotting in the landfill.

I have a few other items that I have started as well. I am working on some desk sized business card, pen and pencil holders as well as a rustic wooden vase to hold dried or silk flowers. It’s looking like I may keep the prototype of the vase, I like it so much, so I’ll have to get busy on a second one for my shop.

I have accomplished all of these recycling projects with basic shop saws, a drill and a sander. Next time you see a downed tree, maybe you can take some home to make your own creations or turn a woodworker in your area onto it, so it doesn’t just get hauled off to the landfill. To see what recycled wood home decor items that I currently have for sale, please check out my Feathers, Leather n Wood shop section.